Manual Fire Alarm Boxes

[tm_pb_section admin_label=”section”][tm_pb_row admin_label=”row”][tm_pb_column type=”4_4″][tm_pb_text admin_label=”Text” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]

Manual Fire Alarm Boxes

Manual fire alarm boxes, or pull stations alarm, are located near exits throughout the protected area on every floor.Once a manual pull station is activated, that device must be reset to normal position before resetting at the Fire Alarm Control Panel. The control can only be reset with permission from the Fire Department.

 

page30image1995228336

 

 

Single action stations require only one step to activate the alarm. For example, the alarm might be activated by pulling down on a lever.

 

 

 

page31image2014464576

 

Double action stations require two steps in order to activate the alarm. You must first break a glass, open a door or lift a cover.

 

 

 

[/tm_pb_text][/tm_pb_column][/tm_pb_row][/tm_pb_section]